Drying Out Your Dallas Hotel After Plumbing Failure And Water Damage
Plumbing Failure And Water Damage
Almost every business owner has had to deal with minor plumbing emergencies at some point. However, when your Dallas hotel has experienced significant water damage from a more substantial plumbing issue, such as a burst pipe, you need to act fast. Once the water is shut off, you have a big mess on your hands to clean up.
Since you cannot afford downtime in your Dallas business, you want to get the help of professionals for your commercial water damage. SERVPRO has the staff and tools you need who can come to your aid any time you need. We move quickly and do our best not to disturb any of your guests who are already in the hotel in other areas.
Drying out your hotel and the contents quickly is essential. Four things determine the amount of time needed for drying which includes the amount of water that needs to be evaporated, the temperature, humidity, and air movement.
Drying happens faster when rooms are heated between seventy to ninety degrees since hot air holds more moisture. If heat is not available, we may use portable heaters. The temperature in the affected areas should ideally be between seventy and eighty degrees. Temperatures over eighty-five degrees on the first days of drying could create too much moisture in the air, causing secondary damage if there are not enough dehumidifiers.
The more water SERVPRO techs can extract or pump out of the structure, the less we need to remove with dehumidifiers. Liquids are easier and faster to remove than gas, and extraction physically is twelve hundred times as efficient than dehumidification is. We use a submersible pump if the water is two inches deep in the area affected. We spend extra time extracting, as it reduces drying time considerable.
Relative humidity is how much moisture the air currently is holding at a given temperature. For us to lower the RH to a comfortable and correct percentage, some of the water in the air has to be moved. We use dehumidifiers to do so, as it is the most efficient way of lowering relative humidity. They remove the evaporated moisture from the air.
Air movement is also crucial for drying. In a water-damaged room, air usually is humid and damp, slowing evaporation. Blowing damp air out and bringing in warm, dry air speeds up the process. We use air movers set in the proper positions to do so, and move where the air movers are as drying progresses to ensure thorough, even drying.
SERVPRO of Northwest Dallas are experts at drying out water-damaged buildings and move quickly so that your hotel has as little interruption as possible. Give us a call at (214) 361-7887 as soon as you realize there is a problem in your business in the areas of Northwest Dallas, Preston Hollow, or Dallas.
Click here for more about Dallas.